Final program

Day 1 Sunday, September 3rd, 2017
Day 2 Monday, September 4th, 2017
  • 08:00 - 16:00 Registration (Building B)
  • 08:20 - 08:45 Opening remarks
    V. Sepelak
  • Session chair: S. L. James
  • 08:45 - 09:10 I-01 Two important periods in the history of mechanochemistry
    L. Takacs
  • 09:10 - 09:35 I-02 A quest for mechanisms of mechanically activated transformations
    F. Delogu
  • 09:35 - 10:00 I-03 Modeling mechanochemical reaction mechanisms
    W. T. Tysoe
  • 10:00 - 10:20 Coffee break (Building A)
  • Session chair: T. Friščić
  • 10:20 - 10:45 I-04 Structure and ion dynamics in mechanosynthesized fluorides
    M. Wilkening
  • 10:45 - 11:00 O-01 Mechanochemical preparation of ultra disperse powders of Si, Ge, Cu, Ag
    N. Z. Lyakhov, T. F. Grigoreva, E. N. Gorina, T. A. Udalova, S. V. Vosmerikov, E. Т. Devyatkina, I. A. Vorsina, Е. А. Pavlov
  • 11:00 - 11:15 O-02 Mechanically induced self-sustaining reactions (MSR) in the LiNH2-xAlCl3 system
    G. Mulas, L. Pisano, S. Enzo, L. Fernández Albanesi, F. C. Gennari, S. Garroni
  • 11:15 - 11:30 O-03 Chalcogenide quaternary nanocrystals for solar cells: Mechanochemical synthesis and properties of kesterite Cu2ZnSnS4
    P. Baláž, M. Baláž, M. Hegeduš, M. Fabián, M. Achimovičová, E. Dutková, M. Kaňuchová, J. Briančin, M. Tešinský, E. Gock
  • 11:30 - 11:45 O-04 Gas-solid reactions induced by mechanochemical activation
    M. Felderhoff, F. Schüth, S. Immohr, R. Eckert, H. Schreyer
  • 11:45 - 12:00 O-05 Advances in surface functionalization of silicon nanoparticles formed by reactive high energy ball milling (RHEBM)
    B. S. Mitchell, M. J. Fink
  • 12:00 - 14:00 Lunch break (Building C)
  • Session chair: A. Ye. Yermakov
  • 14:00 - 14:25 I-05 Nanocrystalline and nanoglassy ceramics by mechanical treatment – Effect on ion dynamics
    P. Heitjans
  • 14:25 - 14:50 I-06 How does mechanical stressing rationalize solid-state synthesis of functional complex oxide nanoparticles?
    M. Senna
  • 14:50 - 15:15 I-07 Mechanochemical synthesis, structure and characterization of fluorine-containing alkaline earth metal compounds
    G. Scholz
  • 15:15 - 15:35 Coffee break (Building A)
  • Session chair: A. Calka
  • 15:35 - 15:50 O-06 If at first you don’t succeed: Fabricating low-defect materials by high-energy ball milling
    A. Düvel, L. Morgan, C. V. Chandran, P. Heitjans, D. C. Sayle
  • 15:50 - 16:05 O-07 Mechanochemical/thermal preparation of Li4Ti5O12. Structural and electrochemical properties
    M. Fabián, M. Žukalová, L. Kavan, E. Tóthová, V. Šepelák, M. Senna
  • 16:05 - 16:20 O-08 Mechanochemical synthesis of solid solutions of MxPb1-xF2 (M = Ca, Sr, Ba)
    M. Heise, G. Scholz, E. Kemnitz
  • 16:20 - 16:35 O-09 Au supported catalysts for CO-oxidation by in-situ ball milling: Influences of synthesis conditions on support and catalytic activity
    H. Schreyer, M. Felderhoff, F. Schüth
  • 16:35 - 16:50 O-10 New approach using a dry coating process for solid-supported catalyst synthesis: Effects of support properties and operation conditions
    X. Liu, N. Fatah
  • 16:50 - 17:05 O-11 Mechanocatalytic preferential CO oxidation
    R. Eckert, M. Felderhoff, F. Schüth
  • 17:05 - 18:05 Poster session I (Building B)
Day 3 Tuesday, September 5th, 2017
  • 08:00 - 16:00 Registration (Building B)
  • Session chair: M. Senna
  • 08:00 - 08:25 I-08 Chemistry 2.0: Developing a new, solvent- free system of chemical synthesis based on mechanochemistry
    T. Friščić
  • 08:25 - 08:50 I-09 New insights in formation pathways: In situ investigations of mechanochemical reactions
    F. Emmerling, H. Kulla, S. Haferkamp, F. Fischer, M. Wilke
  • 08:50 - 09:15 I-10 May the mechanical force be with you: The case of peptides and organometallics
    F. Lamaty
  • 09:15 - 09:40 I-11 Transformation of pharmaceuticals induced by milling
    M. Descamps, J.-F. Willart, E. Dudognon
  • 09:40 - 10:05 I-12 Composites of drugs with inorganic and organic excipients obtained by the mechanochemical methods
    T. P. Shakhtshneyder
  • 10:05 - 10:30 Coffee break (Building A)
    Conference photo (entrance of Building A)
  • Session chair: N. Z. Lyakhov
  • 10:30 - 10:45 O-12 In situ monitoring as tools to study mechanochemical reactions
    I. Halasz, K. Užarević, S. Lukin, T. Friščić
  • 10:45 - 11:00 O-13 Transformations of dexamethasone drug induced by mechanical milling
    P. F. M. Oliveira, J.-F. Willart, J. Siepmann, F. Siepmann, M. Descamps
  • 11:00 - 11:15 O-14 From molecules to biohybrid nanomaterials by ball-milling
    M. Lupacchini, A. Mascitti, L. Tonucci, N. d’Alessandro, C. Charnay, E. Colacino
  • 11:15 - 11:30 O-15 Quantitative in situ monitoring of mechanochemical selectivity in pharmaceutical cocrystal polymorphs
    S. Lukin, T. Stolar, M. Tireli, M. V. Blanco, D. Babić, T. Friščić, K. Užarević, I. Halasz
  • 11:30 - 11:45 O-16 2D correlation spectroscopy in step-by-step study of deformation-induced conversions and transformations of molecular crystals
    D. S. Rybin, G. N. Konygin, V. E. Porsev, D. R. Sharafutdinova, I. P. Arsentyeva, V. V. Boldyrev
  • 11:45 - 12:00 O-17 Mechanoradicals, anions and cations as precursors in chemical reactions and production of composite materials
    B. Baytekin, Ö. Bayrak, T. Bedük
  • 12:00 - 14:00 Lunch break (Building C)
  • Session chair: L. Takacs
  • 14:00 - 14:25 I-13 Recent progress in mechanochemical organic reactions
    L. Li, H.-G. Li, H. Xu, G.-W. Wang
  • 14:25 - 14:50 I-14 Mechanochemical multicomponent transformations and mechanoenzymatic reactions by ball-milling
    J. G. Hernández
  • 14:50 - 15:15 I-15 Mechanochemistry, an easy technique to boost the synthesis of new luminescent coordination polymers
    L. Maini
  • 15:15 - 15:40 I-16 Solvent-free mechanochemical synthesis – fundamentals, scale-up and commercialisation
    S. L. James
  • 15:40 - 16:00 Coffee break (Building A)
  • Session chair: P. Heitjans
  • 16:00 - 16:15 O-18 Synthesis by twin screw extrusion (TSE)
    D. E. Crawford, S. L. James, C. Miskimmin, A. Albadmin, G. Walker
  • 16:15 - 16:30 O-19 Main group mechanochemical synthesis
    F. Garcia
  • 16:30 - 16:45 O-20 Mechanochemical synthesis of highly-ordered microporous zirconium-based metal-organic frameworks
    K. Užarević, A. Fidelli, A. J. Howarth, O. K. Farha, T. Friščić
  • 16:45 - 17:00 O-21 Mechanosynthesis of functional metal-organic frameworks based on acylhydrazone and dicarboxylate linkers
    D. Matoga, K. Roztocki, M. Szufla, D. Jędrzejowski, M. Lupa, M. Hodorowicz, I. Senkovska, S. Kaskel
  • 17:00 - 17:15 O-22 Mechanochemistry and protein self-assembly – a promising combination
    N. Solin
  • 17:15 - 17:30 O-23 Solvation and surface effects on polymorph stabilities
    A. M. Belenguer, G. I. Lampronti, A. J. Cruz-Cabeza, C. A. Hunter, J. K. M. Sanders
  • 17:30 - 17:45 O-24 Effective and selective reduction of α, β-unsaturated carbonyl compounds to the corresponding alcohol under milling conditions
    A. Barranco, M. Felderhoff, F. Schüth
  • 17:45 - 18:10 I-17 Do we always know, what we do not know? Challenges of mechanochemistry
    E. V. Boldyreva
  • 18:10 - 19:10 Poster session II (Building B)
  • 19:30 - 22:00 Meeting of the International Advisory Committee of INCOME
Day 4 Wednesday, September 6th, 2017
  • 08:00 - 16:00 Registration (Building B)
  • Session chair: A. F. Fuentes
  • 08:55 - 09:20 I-18 Scenarios and possible mechanisms of structural-phase transformations in alloys at intensive plastic deformation
    A. Yermakov, Yu. N. Gornostyrev, I. K. Razumov
  • 09:20 - 09:45 I-19 Spark plasma sintering of mechanically milled powders: Gaining advantages from a combination of two non-equilibrium powder processing techniques
    D. V. Dudina, M. A. Korchagin, B. B. Bokhonov, V. I. Mali, A. G. Anisimov
  • 09:45 - 10:10 I-20 Odyssey in mechanical activation of solids – SMILE and beyond
    R. Kumar
  • 10:10 - 10:30 Coffee break (Building A)
  • Session chair: F. Delogu
  • 10:30 - 10:45 O-25 Mechanochemical redox reactions as non-conventional pathway in the synthesis of nanostructured alloys
    V. F. Ruiz-Ruiz, I. Zumeta-Dubé, R. González-Olvera, I. Betancourt, R. Díaz-Pardo, D. Díaz, N. Farfán, J. Arellano-Jiménez, M. José-Yacamán
  • 10:45 - 11:00 O-26 Nanocrystalline alloy of molybdenum with sodium produced by mechanical alloying
    B. Bergk, U. Mühle, I. Povstugar, N. Koutná, D. Holec, H. Clemens, B. Kieback
  • 11:00 - 11:15 O-27 Early stages of mechanical alloying of Al-Cu and Al-Cu-Fe powder mixtures in a high-energy ball mill
    S. F. Tikhov, D. V. Dudina, O. I. Lomovsky, V. A. Sadykov
  • 11:15 - 11:30 O-28 Microstructure, porosity and wear resistance of new Ti-10Ta-8Mo (wt.%) biomedical alloy prepared by high-energy ball milling and annealed processes
    G. Dercz, I. Matuła, M. Zubko, J. Maszybrocka, M. Boruszewska
  • 11:30 - 11:45 O-29 Mössbauer study of the kinetics of mechanical amorphization in Fe70Zr30
    A. F. Manchón-Gordón, J. J. Ipus, J. S. Blázquez, C. F. Conde, A. Conde
  • 11:45 - 12:00 O-30 Mechanochemically-driven amorphization in overstoichiometric arsenic sulfides
    O. Shpotyuk, Z. Bujňáková, P. Baláž, P. Demchenko, Ya. Shpotyuk, J. Cebulski
  • 12:00 - 14:00 Lunch break (Building C)
  • Session chair: D. Oleszak
  • 14:00 - 14:25 I-21 Plasma assisted absorption and reversible desorption of hydrogen gas in Zr, Ti, V powders using electric discharge assisted mechanical milling method
    A. Calka, A. M. Aksenczuk
  • 14:25 - 14:50 I-22 Cryomilling, nanoparticles and ink: Do they represent a new possibility?
    K. Chattopadhyay, C. S. Tiwari, K. Malaviya, H. Prabha
  • 14:50 - 15:05 O-31 Mechanochemical synthesis of mohite (Cu2SnS3)
    M. Baláž, M. Hegedűs, M. Fabián, N. Daneu, E. Dutková, M. Rajňák, J. Kurimský, P. Baláž
  • 15:05 - 15:20 O-32 Mechanochemistry – an effective method for producing complex BiFeO3-based high-temperature piezoelectric materials
    M. Makarovič, A. Benčan Golob, B. Malič, T. Rojac
  • 15:20 - 15:40 Coffee break (Building A)
  • Session chair: F. Lamaty
  • 15:40 - 15:55 O-33 The synthesis of niobium silicides by a mechanochemical process
    D. Ovalı, D. Ağaoğulları, M. L. Öveçoğlu
  • 15:55 - 16:10 O-34 Mechanochemical synthesize of nanocrystalline soft magnetic ferrite in order to investigate structural, magnetic, dielectric and electrical characteristics
    A. Hajalilou
  • 16:10 - 16:25 O-35 Mechanical activation of zeolite and its influence on the nanostructure
    K. Bohács, F. Kristály, Z. Dallos, G. Mucsi
  • 16:25 - 16:40 O-36 Mechanochemical synthesis and silica encapsulation of iron boride nanoparticles
    S. Mertdinç, D. Ağaoğulları, M. L. Öveçoğlu
  • 19:00 - 22:00 Conference dinner (Building D)
Day 5 Thursday, September 7th, 2017
  • 08:00 - 12:00 Registration (Building B)
  • Session chair: P. Baláž
  • 09:20 - 09:45 I-23 c-LLZO – towards single phase compound by mechanochemical processes
    D. Oleszak, P. Billik, M. Pawlyta
  • 09:45 - 10:10 I-24 Mechanical activation effect in the chemistry of a typical float glass batch
    A. F. Fuentes, P. Rodríguez-Salazar, O. Burciaga-Díaz
  • 10:10 - 10:30 Coffee break (Building A)
  • Session chair: R. Kumar
  • 10:30 - 10:45 O-37 Effect of particle density on powder mixing in a rotating drum for hydrogen generation
    J. Kano, S. Ishihara, M. Yamamoto
  • 10:45 - 11:00 O-38 Thermal and mechanical properties of fluorinated ethylene and polyphenylene sulfide based composites obtained by high energy ball milling
    V. V. Tcherdyntsev, L. K. Olifirov, S. D. Kaloshkin, M. Yu. Zadorozhnyy, V. D. Danilov
  • 11:00 - 11:15 O-39 Mechanical alloying and electric current assisted sintering adopt for metal matrix composite materials processing
    A. Miklaszewski
  • 11:15 - 11:30 O-40 Synthesis of sodium polysulfide through the mechanical treatment
    T. Ketegenov, N. Khan, O. Tyumentseva, T. Oserov
  • 11:30 - 11:45 O-41 X-ray and Mössbauer study of solid-state reactions in heat treated nanocrystalline Fe-Cr alloys, obtained by mechanical alloying
    V. E. Porsev, A. L. Ulyanov
  • 11:45 - 12:00 O-42 Mechanocomposites in the system UPTFE + silicate
    I. A. Vorsina, T. F. Grigoreva, T. A. Udalova, E. T. Devyatkina, S. V. Vosmerikov, N. Z. Lyakhov
  • 12:00 - 14:00 Lunch break (Building C)
  • Session chair: K. Chattopadhyay
  • 14:00 - 14:15 O-43 Acid leaching performance of mechanically activated pyrophyllite ore for Al2O3 extraction
    M. Erdemoğlu, M. Birinci, T. Uysal, E. Porgalı, T. S. Barry
  • 14:15 - 14:30 O-44 Synthesis and characterization of Al–Cu–Fe quasicrystal reinforced AA 6082 Al matrix composite by mechanical milling
    Y. Shadangi, K. Chattopadhyay, J. Basu, R. Manna, N. K. Mukhopadhyay
  • 14:30 - 14:45 O-45 A novel route to synthesize micro-laminated TiAl matrix composite sheets with high performance
    X. Cui, L. Geng, J. Zhang, G. Fan
  • 14:45 - 15:00 O-46 Structural and optical properties of nanostructured copper sulfide semiconductor synthesized in an industrial mill
    M. Achimovičová, E. Dutková, E. Tóthová, Z. Bujňáková, J. Briančin
  • 15:00 - 15:15 O-47 Mechanochemical methods in the production of high purity gases
    V. L. Kozhevnikov, A. O. Ivanov, B. Verbitsky, K. Chuntonov
  • Session chairs: M. Senna and V. Šepelák
  • 15:15 - 15:45 Discussion / Concluding remarks
Download

Poster sessions

Poster session I Monday, September 4th, 2017 17:05 - 18:05
  1. The effect of Sn as the process control agent on the fabrication and structural properties of new Ti-Ta-Mo-Sn biomedical alloy synthesized by high energy ball milling G. Dercz, I. Matuła, M. Zubko
  2. Alloying behavior and mechanical properties of AlCoCrFeNiMn high entropy alloy (HEA) processed by mechanical alloying and microwave sintering V. Shivam, N. K. Mukhopadhyay
  3. Effect of Co content on phase structure and hydrogenation properties of La-Mg-Ni alloys M. Balcerzak, M. Nowak, M. Jurczyk
  4. In-situ Raman spectroscopic monitoring of ball milling preparations of amidoboranes N. Biliškov, I. Halasz, K. Užarević, J. Grbović Novaković, I. Milanović, S. Lukin, S. Milošević, A. Borgschulte, E. Callini
  5. Characterization of phases in the V2O5–Yb2O3 system obtained by high-energy ball milling and high-temperature treatment M. Piz, P. Dulian, E. Filipek, K. Wieczorek-Ciurowa, P. Kochmanski
  6. Dielectric behaviour of (Ba1-xSrx)(Ti1-xSnx)O3 ceramics obtained by a mechanochemical syntheses W. Bąk, P. Dulian, B. Garbarz-Glos, C. Kajtoch, W. Żukowski
  7. The mechanochemical synthesis for the preparation of advanced ceramics based on barium titanate B. Garbarz-Glos, P. Dulian, W. Bąk, H. Noga
  8. Production of nanocomposition colloidal systems for cosmetic application N. N. Mofa, Z. A. Mansurov, A. M. Kaliyeva, T. V. Chernoglazova, B. S. Sadykov
  9. Effect of diluting agent on the synthesis of silver iodide nanoparticles during co-milling B. B. Tatykayev, Zh. S. Shalabayev, S. B. Tugelbay, B. M. Uralbekov, M. M. Burkitbayev, F. Kh. Urakaev
  10. Mechanochemical synthesis of LiFeGe2O6 and LiFeTi2O6 E. Tóthová, R. Witte, K. L. Da Silva, A. Zorkovská, M. Senna, H. Hahn, P. Heitjans, V. Šepelák
  11. Influence of transition metals on quasicrystalline phase formation in Al-Cu-Fe mechanically alloyed powder M. Mitka, A. Goral, L. Litynska-Dobrzynska
  12. Determination of the activation energy of Re2C by high-energy ball milling A. Martínez-García, M. G. Granados-Fitch, M. Avalos-Borja, B. Winkler, A. K. Navarro-Mtz, E. A. Juarez-Arellano
  13. Characterization of nanostructured materials using TEM and SEM microscopy P. Snopiński, T. Tański
  14. Mechanochemical plant-mediated synthesis of silver nanoparticles and their biological activity M. Baláž, Z. Bujňáková, N. Daneu, E. Dutková, Ľ. Balážová, M. Vargová, A. Salayová, Z. Bedlovičová, Ľ. Tkáčiková
  15. Photocatalytic properties of N-doped ZnO prepared by mechanochemical synthesis N. G. Kostova, M. Fabian, E. Dutkova, Y. Karakirova, A. Eliyas
  16. Physical properties of the lead-free BaFe1/2Nb1/2O3 ceramics obtained from mechanochemically synthesized powders D. Bochenek, P. Niemiec, M. Adamczyk-Habrajska, I. Szafraniak-Wiza
  17. Residual stress analysis and assessment of mechanical properties of dissimilar material welded joint between Alloy 617 and 12Cr steel H. Waqar Ahmad, J. H. Lee, J. Ho Hwang, D. H. Bae
  18. Structural studies on CuCr2S4 nanospinels obtained by mechanical alloying M. Karolus, J. Panek, E. Maciążek
  19. Defect structure of mechanically activated MoO3 and the chemical activity of Al/MoO3 nanothermite М. V. Sivak, A. N. Streletskii, I. V. Kolbanev
  20. Synthesis of Cr3C2 by a combination of mechanical alloying and annealing S. E. Aghili, M. S. Esfahani
  21. Synthesis of CuAlO2 delafossite from mechanically activated CuO and polyaluminium chloride D. Nýblová
  22. Thermal plasma spheroidization of high-nitrogen austenitic stainless steel powder alloys synthesized by mechanical alloying N. G. Razumov, A. A. Popovich
  23. Mechanically alloyed aluminium powder consolidated by ERS E. S. Caballero, F. Ternero, R. Astacio, F. G. Cuevas, J. M. Montes, J. Cintas
  24. Production of compacts from Fe-Si powders amorphized by MA and consolidation by ERS-MF F. Ternero, E. S. Caballero, R. Astacio, F. G. Cuevas, J. Cintas, J. M. Montes
  25. Effect of particle size on the optical properties of ZnO nanopowders fabricated by wet milling T. Şimşek, A. Ceylan, G. Ş. Aşkın, Ş. Özcan
  26. Tuning the magnetic properties of cobalt-ferrite nanostructures by changing the inversion parameter and crystallite size with milling M. B. Kaynar, Ş. Özcan
  27. Mechanosynthesis of multisubstituted hydroxyapatite nanopowders B. Nasiri-Tabrizi, R. Ebrahimi-Kahrizsangi, A. Fakharzadeh, W. J. Basirun
  28. Cation exchange capacity of mechanically activated glauconite – fundamental aspects and relevance R. Singla, T. C. Alex, R. Kumar
  29. Mechanochemical preparation of titanium and hafnium carbides T. F. Grigoreva, B. P. Tolochko, A. I. Ancharov, S. V. Vosmerikov, E. T. Devyatkina, Т. А. Udalova, Е. А. Pavlov, N. Z. Lyakhov
  30. Effect of samarium on Fe2O3 on magnetization using high energy milling P. Vera-Serna, F. N. Tenorio-González, M. Kusý, J. A. Juanico-Loran, F. Sánchez-de-Jesús, M. Silva-Fragoso
  31. Macro-segregation mechanism and control for the low pressure die casting of ZL205A aluminum alloy S. Wu, W. Chen
  32. Microstructure and mechanical properties of the SiC/Zr4 joints brazed using the TiZrNiCu filler alloy J. Zhang, Q. Qi
  33. GRADE 1 titanium microstructure and properties investigation after Cr3C2 powder alloying using high power diode laser M. Wiśniowski, T. Tański, D. Janicki
  34. Surface analysis of PET bottles by XPS method M. Kanuchova, L. Kozakova, T. Bakalar, J. Skvarla
  35. Wear resistant ALD/PVD hybrid coatings deposited on sintered tool substrate M. Staszuk, D. Pakuła, G. Chladek
  36. Photovoltaic response of bulk heterojunctions based on nanopowders of kesterite and n-type semiconductors O. P. Dimitriev, D. O. Grynko, A. M. Fedoryak, T. P. Doroshenko, M. Kratzer, C. Teichert, Yu. V. Noskov, N. A. Ogurtsov, A. A. Pud, P. Balaz, M. Balaz, M. Tesinsky, M. Hegedus
  37. Technology and application of mechanical activated ground phosphate rock as fertilizers N. N. Fang, Y. L. Shi, Y. D. Xu
  38. Study residual stress measurement of oil and gas pipe welds M. H. Alhafadhi, V. Mertinger
  39. In situ investigation of mechanochemical Knoevenagel condensations S. Haferkamp, F. Fischer, W. Kraus, F. Emmerling
  40. In situ investigation of mechanochemical syntheses of manganese phosphonates I. Akhmetova, M. Wilke, F. Emmerling
  41. Soot combustion efficiency using Fe, Cu, and Co impregnated on kaolin based ZSM-5 for diesel soot oxidation D. O. Obada, M. Dauda, F. O. Anafi, A. S. Ahmed, O. A. Ajayi, D. Dodoo-Arhin, A. Y. Atta
Poster session II Tuesday, September 5th, 2017 18:10 - 19:10
  1. Mechanochemical synthesis of aluminium metal-organic frameworks S. Lavery, J. Casaban, S. James
  2. BaF-benzenedicarboxylate: Mechanochemical synthesis of a new representative of coordination polymers without organofluorine linkers S. Breitfeld, G. Scholz, F. Emmerling, E. Kemnitz
  3. Inadvertent liquid-assisted grinding – possible key to organic mechanochemical co-crystallisation I. A. Tumanov, A. A. L. Michalchuk, A. A. Politov, E. V. Boldyreva
  4. In situ monitoring and mechanism of the mechanochemical Knoevenagel reaction M. Tireli, S. Lukin, T. Stolar, M. di Michieli, I. Halasz, K. Užarević
  5. Mechanochemical protease-catalyzed peptide and amide bond formation K. J. Ardila-Fierro, D. Crawford, S. L. James, C. Bolm, J. G. Hernández
  6. Mechanochemical synthesis of colossal dielectric permittivity electroceramics for capacitors applications P. Dulian, W. Bąk, B. Grabarz-Glos, M. Piz, W. Żukowski
  7. Influence of mechanochemical treatment and sintering conditions on final dielectric properties of (Ba,Ca)TiO3 ceramics K. Feliksik, L. Kozielski, I. Szafraniak-Wiza, D. Radoszewska, M. Adamczyk-Habrajska
  8. Preparation and dielectric properties of K1/2Na1/2NbO3 ceramics obtained from mechanically activated powders I. Szafraniak-Wiza, D. Radoszewska, J. Dzik, D. Bochenek, M. Adamczyk-Habrajska
  9. Synthesis of intermetallic based nanocomposites via mechanochemical route M. H. Enayati
  10. Mechanochemical synthesis of sulfur nanoparticles via reaction of sodium thiosulfate with crystalline acids Zh. S. Shalabayev, B. B. Tatykaev, B. M. Uralbekov, M. M. Burkitbayev, F. Kh. Urakaev
  11. Characterization of sintering process of high-energy milled Cu-TiB2 materials H. Dębecka, M. Hebda, J. Kazior
  12. Mechanochemical treatment of micrometric aluminium with organic modifiers for solid-propellant rockets B. S. Sadykov, N. N. Mofa, L. Galfetti, Z. A. Mansurov
  13. Mechanochemical synthesis of coal based magnetic carbon for As(V) and Cd(II) removal A. Zubrik, M. Matik, M. Lovás, Z. Danková, S. Hredzák, V. Šepelák
  14. The influence of microwave radiation on crushability and grindability of raw materials I. Znamenáčková, M. Lovás, S. Dolinská, V. Čablík, S. Hredzák
  15. Mechanical alloying of beta titanium alloys in presence of magnesium G. Adamek
  16. Stability of magnetite based nanoparticles dispersed in different types of polymers using ultra-fine milling approach Z. Bujňáková, E. Dutková, E. Tóthová, J. Briančin, Z. Cherkezova-Zheleva, J. Kováč
  17. Nanocrystalline matrix NiAl-B composites produced by consolidation of mechanically alloyed powders M. Krasnowski, S. Gierlotka, T. Kulik
  18. Mechanochemical synthesis of low-fluorine doped aluminium hydroxide fluorides V. Scalise, G. Scholz, E. Kemnitz
  19. X-ray powder diffraction usefulness in mechanical activation and alloying, looking beyond crystallinity F. Kristály, G. Mucsi
  20. Influence of ball milling on the structure and catalytic properties of SrFe12O19 hexaferrite K. V. Koleva, N. I. Velinov, I. G. Genova, T. S. Tsoncheva
  21. Structural, magnetic and optical properties of mechanochemically synthesized CuFeS2 nanoparticles E. Dutková, Z. Bujňáková, I. Škorvánek, M. J. Sayagués, A. Zorkovská, J. Kováč, J. Kováč, Jr., P. Baláž
  22. Mechanical alloying of NbC and Si in stirred media mill A. Al-Azzawi, P. Baumli, F. Kristály, Á. Rácz, G. Mucsi
  23. Soft magnetic Fe based alloys produced by mechanical alloying A. Carrillo, L. Escoda, J. Saurina, J. J. Suñol
  24. Microstructure and mechanical properties of AZ61 magnesium alloy after EX-ECAP O. Hilšer, S. Rusz, L. Krejčí, F. Špalek, J. Džugan, T. Tański
  25. Structural characterization, microwave properties and corrosion behavior of Fe-Si alloy prepared by wet ball milling K. Yazovskikh, A. A. Shakov, S. F. Lomayeva, G. N. Konygin, O. M. Nemtsova, A. O. Shiryaev, D. A. Petrov, K. N. Rozanov
  26. Synthesis and electrochemical properties of composites based on conductive polymers with mechanically activated graphite particles N. V. Lyalina, A. V. Syugaev, A. N. Maratkanova, K. Yazovskikh
  27. Effect of mechanochemical milling on the FSDP-related XRD correlations in overstoichiometric As-Se glassy alloys Ya. Shpotyuk, J. Cebulski, P. Demchenko, Z. Bujňáková, P. Baláž, O. Shpotyuk
  28. A tentative description of the first stages of mechanical alloying G. Pia, A. Cincotti, F. Delogu
  29. Fabrication of Cu-graphite metal matrix composites B. Lasio, R. Orrù, G. Cao, M. Cabibbo, F. Delogu
  30. In situ measurement of luminescence emitted by coumarin 1 in ball drop experiments C. Ricci, R. Corpino, A. Porcheddu, G. Ligios, F. Delogu
  31. Propagation modes of self-sustaining reactions activated by mechanical processing A. Cincotti, G. Pia, L. Takacs, F. Delogu
  32. Water-rocks interaction during mechanical activation of olivine F. Torre, F. Delogu, S. Enzo, V. Farina, G. Mulas, C. Pistidda, S. Garroni
  33. Thermodynamically stable nanostructured metal alloys by mechanical alloying: The ICARUS project The ICARUS consortium
  34. Recycling of critical metals: An innovative application of mechanochemistry S. Van Loy, K. Binnemans, T. Van Gerven
  35. Mechanical properties of hydrogels and automated system "KERN-DP" A. P. Onanko, S. A. Vyzhva, Y. A. Onanko, N. P. Kulish, V. V. Kuryluk, A. V. Shabatura, R. V. Homenko, A. N. Onischenko
  36. CO2MPRISE – Excellence training in solutions for CO2 capture technology V. Farina, G. Mulas, S. Garroni, S. Cuesta Lopez, C. Pistidda, I. Yakoumis, N. Vlachos, F. Gennari, F. Gracia
  37. Application of mechanically activated fly ash as a filler for polymer material (PETF) N. Khan, O. Tyumentseva, T. Ketegenov, B. Tatykaev
  38. Analyses of plastic flow localization in bimetal electrolytically saturated with hydrogen S. A. Barannikova, Yu. V. Li, L. B. Zuev
  39. Mechanical properties of shape memory alloy in dissimilar welding in comparison with similar welding M. H. Sadati, F. Haftani
  40. Development of asbestos free lining material from mahogany and doum palm J. Makama, D. S. Yawas, A. I. Obi, M. U. Obot, D. O. Obada
  41. Low-cost catalytic control of indoor PM emissions from solid fuel combustion M. Peter, D. M. Kulla, N. O. Ominsanya, A. Y. Atta, D. O. Obada, S. Umaru

Invited / Plenary speakers

Peter Billik

Peter Billik

I-27

Faculty of Natural Sciences, Comenius University, Slovakia

Elena V. Boldyreva

Elena V. Boldyreva

I-17

Institute of Solid State Chemistry and Mechanochemistry, Siberian Branch of the Russian Academy of Sciences, Russia

Andrzej Calka

Andrzej Calka

I-21

Faculty of Engineering, University of Wollongong, Australia

Kamanio Chattopadhyay

Kamanio Chattopadhyay

I-22

Indian Institute of Science, Bangalore, India

Francesco Delogu

Francesco Delogu

I-02

Dipartimento di Ingegneria Meccanica, Chimica, e dei Materiali, Università degli Studi di Cagliari, Italy

Marc Descamps

Marc Descamps

I-11

Laboratory UMET, UMR CNRS 8207, University Lille1, France

Dina V. Dudina

Dina V. Dudina

I-19

Institute of Solid State Chemistry and Mechanochemistry, Siberian Branch of the Russian Academy of Sciences, Russia

Franziska Emmerling

Franziska Emmerling

I-09

BAM Federal Institute for Materials Research and Testing, Germany

Tomislav Friščić

Tomislav Friščić

I-08

Department of Chemistry and FRQNT Centre for Green Chemistry and Catalysis, McGill University, Canada

Antonio F. Fuentes

Antonio F. Fuentes

I-24

Cinvestav Unidad Saltillo, Mexico

Paul Heitjans

Paul Heitjans

I-05

Institut für Physikalische Chemie und Elektrochemie, Leibniz Universität Hannover, Germany

José G. Hernández

José G. Hernández

I-14

Institute of Organic Chemistry, RWTH Aachen University, Germany

Stuart L. James

Stuart L. James

I-16

School of Chemistry and Chemical Engineering, Queen’s University Belfast, United Kingdom

Rakesh Kumar

Rakesh Kumar

I-20

CSIR-National Metallurgical Laboratory, India

Frédéric Lamaty

Frédéric Lamaty

I-10

Institut des Biomolécules Max Mousseron (IBMM), UMR 5247, Université de Montpellier, CNRS, ENSCM, France

Lucia Maini

Lucia Maini

I-15

Dipartimento di Chimica 'G. Ciamician', Università di Bologna, Italy

Nilay Krishna Mukhopadhyay

Nilay Krishna Mukhopadhyay

I-28

Department of Metallurgical Engineering, Indian Institute of Technology, India

Dariusz Oleszak

Dariusz Oleszak

I-23

Faculty of Materials Science and Engineering, Warsaw University of Technology, Poland

Gudrun Scholz

Gudrun Scholz

I-07

Department of Chemistry, Humboldt-Universitat zu Berlin, Germany

Mamoru Senna

Mamoru Senna

I-06

Faculty of Science and Technology, Keio University, Japan

Tatyana P. Shakhtshneyder

Tatyana P. Shakhtshneyder

I-12

Institute of Solid State Chemistry and Mechanochemistry, Siberian Branch of the Russian Academy of Sciences, Russia

Andrey N. Streletskii

Andrey N. Streletskii

I-25

Institute of Chemical Physics, Russian Academy of Sciences, Russia

Laszlo Takacs

Laszlo Takacs

I-01

Department of Physics, University of Maryland Baltimore County, USA

Wilfred T. Tysoe

Wilfred T. Tysoe

I-03

Department of Chemistry and Biochemistry and Laboratory for Surface Studies, University of Wisconsin-Milwaukee, USA

Farit Kh. Urakaev

Farit Kh. Urakaev

I-26

Sobolev Institute of Geology and Mineralogy, Siberian Branch of the Russian Academy of Sciences, Russia

Guan-Wu Wang

Guan-Wu Wang

I-13

Hefei National Laboratory for Physical Sciences at the Microscale, Department of Chemistry, University of Science and Technology of China, P. R. China

Martin Wilkening

Martin Wilkening

I-04

Institute for Chemistry and Technology of Materials (NAWI Graz), Christian-Doppler Laboratory for Lithium Batteries, Austria

Anatoly Yermakov

Anatoly Yermakov

I-18

M. N. Miheev Institute of Metal Physics, Ural Branch of the Russian Academy of Sciences, Russia